Mechanical bonding and sealing of electronic and electrical components such as power supplies, photovoltaic modules, and communication equipment, as well as bonding and fixing of electronic components. Bonding and sealing of other metals, plastics, and glass with flame-retardant requirements.
1. Clean the surface: Clean the surface of the object to be bonded or coated, removing rust, dust, and oil.
2. Apply the adhesive: Cut open the cap of the adhesive tube and squeeze the adhesive onto the cleaned surface, distributing it evenly. Then, assemble and fix the surfaces to be bonded.
3. Curing: Place the bonded or sealed components in the air to allow them to cure naturally. The curing process is from the surface inwards; within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a depth of 2-4 mm.